How to Build Your Own Bass Guitar: Tools & Techniques

This article originally appeared in https://articlescad.com/how-to-build-your-own-bass-guitar-tools-techniques-34454.html

Maybe you have wanted to purchase a bass guitar and seem not to have quite the funds. You have decided to do things in an old-fashioned manner and Build Your Own Bass Guitar by yourself. But making a guitar is not quite easy. There are several ways you could go about the guitar-making project. You may be thinking of where to start and what is the best way to make your own bass guitar. What tools are needed? In this article, you will get a quick overview of the two different methods to build a bass guitar.

1. General Planning: The first step is to plan what you want to build a Bass Guitar Kit. You need bass and you wanted to make a smaller neck. With a CNC router, it is the most complicated build adventure. The CNC is usually used to build bodies and guitar necks but plans to machine the entire thing in all in one piece. It is advisable to plan out your guitar and purchase all the components before starting the projects. There are primary tools you use: hammers, table saw, digital caliper, router, cordless drill, and many more.

2. Planning & Sketching: Plan to build the neck through bass and bolt-on-the-neck style. Do 3D routing over the full length at one time and then flip it over the machine on the backside. The steps you need to take out to sketch it out with any dimensional changes. Do the separate sketches for the backside and the fingerboard to capture the size accurately.

3. Wood Preparation: The centerpiece will be maple. You must purchase the right type of wood that is at least 2 inches thick. Make sure that the pieces have the right dimensions for their intended purpose. You can buy a jointer that gives you a huge help as it can help to glue the wood parts together with constant spacing. You can use drills, clamps, and other normal woodworking tools to finish the project off.

4. Body Cutting: Next step to the mounting board and clamp the board to the router table. Flipped it over, bolted it down, and cut the front side 3D surface. After measuring some of the parts, create tool paths. Re-bolted the guitar to the mounting board in order to cut the truss bar slot. Next, do sanding to clean off the rough areas where the mounting holes are located.

5. Electronics: A Bass Guitar is an electrical instrument. Just create a hole in the bottom to fix the wire to the amplifier. Then add volume knobs and pickups into the guitar. If you are doing it the first time and not sure about it, you must do this job professionally.

In Conclusion:

Solo Music Gear offers quality services to its musicians and hobbyists. They also offer Left Handed Guitar Kits. Get in touch today through the link www.solomusicgear.com.